plainbox-run (1)


plainbox run [-h] [--non-interactive] [-n] [--dont-suppress-output]
             [-f FORMAT] [-p OPTIONS] [-o FILE] [-t TRANSPORT]
             [--transport-where WHERE] [--transport-options OPTIONS]
             [-T TEST-PLAN-ID] [-i PATTERN] [-x PATTERN]


Run a test job

This command runs zero or more Plainbox jobs as a part of a single session and saves the test results. Plainbox will follow the following high-level algorithm during the execution of this command.

  1. Parse command line arguments and look if there’s a session that can be resumed (see RESUMING below). If so, offer the user a choice to resume that session. If the resume operation fails move to the next qualifying session. Finally offer to create a new session.

  2. If the session is being resumed, replay the effects of the session execution from the on-disk state. This recreates generated jobs and re-introduces the same resources into the session state. In other words, no jobs that have run in the past are re-ran.

    If the resumed session was about to execute a job then offer to skip the job. This allows test operators to skip jobs that have caused the system to crash in the past (e.g. system suspend tests)

    If the session is not being resumed (a new session was created), set the incomplete flag.

  3. Use the job selection (see SELECTING JOBS below) to derive the run list. This step involves resolving job dependencies and reordering jobs if required.

  4. Follow the run list, executing each job in sequence if possible. Jobs can be inhibited from execution by failed dependencies or failed (evaluating to non-True result) resource expressions.

    If at any time a new job is being re-introduced into the system (see GENERATED JOBS below) then the loop is aborted and control jumps back to step 3 to re-select jobs. Existing results are not discarded so jobs that already have some results are not executed again.

    Before and after executing any job the session state is saved to disk to allow resuming from a job that somehow crashes the system or crashes Plainbox itself.

  5. Remove the incomplete flag.

  6. Export the state of the session to the desired format (see EXPORTING RESULTS) and use the desired transport to send the results (see TRANSPORTING RESULTS).

  7. Set the submitted flag.


Plainbox offers two mechanisms for selecting jobs. Both can be used at the same time, both can be used multiple times.

Selecting jobs with patterns

The first mechanism is exposed through the --include-pattern PATTERN command-line option. It instructs Plainbox to select any job whose fully-qualified identifier matches the regular expression PATTERN.

Jobs selected this way will be, if possible, ordered according to the order of command line arguments. For example, having the following command line would run the job foo before running the job bar:

plainbox run -i ‘.*::foo’ -i ‘.*::bar’


Plainbox offers a way to generate jobs at runtime. There are two motivations for this feature.

Instantiating Tests for Multiple Devices

The classic example is to probe the hardware (for example, to enumerate all storage devices) and then duplicate each of the store specific tests so that all devices are tested separately.

One limitation is that jobs cannot override existing definitions.


Plainbox offers a session resume functionality whereas a session that was interrupted (either purposefully or due to a malfunction) can be resumed and effectively continued where it was left off.

When resuming a session you may be given an option to either re-run, pass, fail or skip the test job that was being executed before the session was interrupted. This is intended to handle both normal situations, such as a “system reboot test” where it is perfectly fine to “pass” the test without re-running the command. In addition it can be used to handle anomalous cases where the machine misbehaves and re-running the same test would cause the problem to occur again indefinitely.


This functionality does not allow to interrupt and resume a test job that is already being executed. Such job will be restarted from scratch.

Plainbox tries to ensure that a single session is consistent and the assumptions that held at the start of the session are maintained at the end. To that end, Plainbox will try to ensure that job definitions have not changed between two separate invocations that worked with a single session. If such a situation is detected the session will not be resumed.


Plainbox offers a way to export the internal state of the session into a more useful format for further processing.

Selecting Exporters

The exporter can be selected using the --output-format FORMAT command-line option. A list of available exporters (which may include 3rd party exporters) can be obtained by passing the --output-format ? option.

Some formats are more useful than others in that they are capable of transferring more of the internal state. Depending on your application you may wish to choose the most generic format (tar.xz) and process it further with additional tools, choose the most basic format (text) just to get a simple summary of the results or lastly choose one of the two specialized formats (xlsx and html) that are specific to the Checkbox workflow.

Out of the box the following exporters are supported:


This exporter creates a static HTML page with human-readable test report. It is useful for communicating with other humans and since it is entirely standalone and off-line it can be sent by email or archived.


This exporter creates a JSON document with the internal representation of the session state. It is the most versatile exporter and it is useful and easy for further processing. It is not particularly human-readable but can be quite useful for high-level debugging without having to use pdb and know the internals of Plainbox.


This exporter creates quasi-RFC822 documents. It is rather limited and not used much. Still, it can be useful in some circumstances.


This is the default exporter. It simply prints a human-readable representation of test results without much detail. It discards nearly all of the internal state though.


This exporter creates a standalone .xlsx (OOXML format for Microsoft Excel) file that contains a human-readable test report. It is quit similar to the HTML report but it is easier to edit. It is useful for communicating with other humans and since it is entirely standalone and off-line it can be sent by email or archived.

It depends on python3-xlsxwriter package

Selecting Exporter Options

Certain exporters offer a set of options that can further customize the exported data. A full list of options available for each exporter can be obtained by passing the --output-options ? command-line option.

Options may be specified as a comma-separated list. Some options act as simple flags, other options can take an argument with the option=value syntax.

Known exporter options are documented below:


Exported data will include the input/output log associated with each job result. The data is included in its native three-tuple form unless one of the squash-io-log or flatten-io-log options are used as well.

IO logs are representations of the data produced by the process created from the shell command associated with some jobs.

When used together with with-io-log option it causes Plainbox to discard the stream name and time-stamp and just include a list of base64-encoded binary strings. This option is more useful for reconstructing simple “log files”
When used together with with-io-log option it causes Plainbox to concatenate all of the separate base64-encoded records into one large base64-encoded binary string representing the whole communication that took place.
Exported data will include the run list (sequence of jobs computed from the desired job list).
Exported data will include the full list of jobs known to the system
Exported data will include the full resource map. Resources are records of key-value sets that are associated with each job result for jobs that have plugin type resource. They are expected to be printed to stdout by such resource jobs and are parsed and stored by Plainbox.
Exported data will include some of the properties of each job definition. Currently this set includes the following fields: plugin, requires, depends, command and description.
Exported data will include attachments. Attachments are created from stdout stream of each job having plugin type attachment. The actual attachments are base64-encoded.
Exported data will include comments added by the test operator to each job result that has them.
Exported data will include the hash attribute alongside each job result. The hash attribute is the checksum of the job definition’s data.
The generated JSON document will be minimal (devoid of any optional whitespace). This option is best to be used if the result is not intended to be read by humans as it saves some space.

All of the options have the same meaning as for the json exporter: with-io-log, squash-io-log, flatten-io-log, with-run-list, with-job-list, with-resource-map, with-job-defs, with-attachments, with-comments, with-job-hash. The only exception is the machine-json option which doesn’t exist for this exporter.

Exported spreadsheet will include a worksheet detailing the hardware devices based on lspci, lsusb, udev, etc.
Exported spreadsheet will include test figures. This includes the percentage of tests that have passed, have failed, have been skipped and the total count.
Exported spreadsheet will include job descriptions on a separate sheet
Exported spreadsheet will include text attachments on a separate sheet


Exported results can be either saved to a file (this is the most basic, default transport) or can be handed to one of the transport systems for further processing. The idea is that specialized users can provide their own transport systems (often coupled with a specific exporter) to move the test results from the system-under-test to a central testing result repository.

Transport can be selected with the --transport option. Again, as with exporters, a list of known transports can be obtained by passing the --transport ? option. Transports need a destination URL which can be specified with the --transport-where= option. The syntax of the URL varies by transport type.

Plainbox comes equipped with the following transports:


This transport can send the results exported using the tar exporter to the Canonical Certification Website (


Optional arguments:

 skip tests that require interactivity
-n, --dry-run don’t really run most jobs
 don’t suppress the output of certain job plugin types
-f, --output-format
 save test results in the specified FORMAT (pass ? for a list of choices)
-p, --output-options
 comma-separated list of options for the export mechanism (pass ? for a list of choices)
-o, --output-file
 save test results to the specified FILE (or to stdout if FILE is -)
-t, --transport

use TRANSPORT to send results somewhere (pass ? for a list of choices)

Possible choices: ?, file, stream

 where to send data using the selected transport
 comma-separated list of key-value options (k=v) to be passed to the transport
-T, --test-plan
 load the specified test plan
-i, --include-pattern
 include jobs matching the given regular expression
-x, --exclude-pattern
 exclude jobs matching the given regular expression
comments powered by Disqus